Barrier Structures and Cavitation Vortices
Some boundaries photographed in cavitation bubbles. This is from Bob Greenyers video that I mentioned yesterday. I grabbed the coolest images to show here today.
Image A shows the sequence as a cavitation bubble has formed just below the water surface, so the water surface bulges upward and looks like a little hat.
Image B, the next image shows a spiral vortex jetting inward to the center, and if you look closely at the center, there are 2 little vortices on each side. I believe you are looking at a cross section through a donut shape, that you might call toroidal or plasmoidal ring.
Image D is a closeup of that donut circled in green.
Image C, you can find those un-colored side-by-side circles. I've also marked in a yellow circle on the outer maximum diameter. It's Bob's excellent observation that circles of various ratios are respected in making the bubble layers. ( The experiment and photography was done by Crum et al.)
Image E and F show smaller cavitation bubbles bursting on the surface of the whitish sphere, unable to penetrate it. That's darn cool.
Image G is an Alexeev showerhead that creates jets 10x stronger than the water pressure. Bob wants us to notice that the vortex into the cavitation bubble is very similar to the Alexeev shower jets.
Image H is just me realizing that countersink drill bits might be able to drill into acrylic/plexiglass and create almost similar flow path as on image B. Bob says several times, you can't improve upon nature. The Alexeev showerhead sales info says it also adds a lot of ions / energy into the water that passes through those jets. Alrighty then... I like making excess energy!
Bobs recent video: https://www.youtube.com/watch?v=ycKzxmh4Hno